Caterpillar Bulldozer Ripper Cylinder in Utah - Our firm offers a wide selection of different replacement accessories and parts for many providers of excavators, loaders, and bulldozers. Our educated Utah group of parts specialists are standing by to help you acquire the parts you're after.
Inspect a Forklift
HRSDC and OSHA report that over 10,000 workplace injuries connected to fork lifts occur each year. Driver error is the reason for many of these accidents. Lack of appropriate equipment maintenance and check results in numerous others. Forklift maintenance and operation is not just the reason for personal injuries, but also of property damage. Forklifts can damage building structures, overhead pipes and sprinklers, and other machines when incorrectly used. The following day by day inspections must be performed so as to reduce the likelihood of forklift accidents.
Turn off the engine before checking various fluid levels: fuel, engine oil, hydraulic oil, coolant and brake fluid. The tires must be inspected for signs of wear and tear. Check the tire air pressure. Check the forks' condition. The load backrest should be securely attached. Do a visual check of the top-clip retaining pin and heel. Next perform an inspection of the mast chains, hydraulic hoses, cables and stops. Ensure that both the finger and overhead guards are firmly attached.
LP forklifts have propane tanks that need to be inspected for indications of rust, corrosion or damage. Test the battery's electrolyte levels and charge. All belts should be checked for wear. Check to make certain the owner's handbook is stored on-board the forklift in a storage compartment. Test the seat belt to make certain the latches are secure. Check the hood latch to make certain that it is working as it should.
To make sure there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate promptly. Test the accelerator and the steering controls. The parking break and the service break must be working correctly.
To ensure proper functioning in both reverse and forward, the drive control and tilt control must be inspected. The functioning of the lowering control, the hoist and attachment control needs periodic inspection. Check the lights and horn. Then check the wipers, heater and defroster to make certain they are functioning smoothly. Check each gauge to find out that it is reading within functional limits.
How to Replace Forklift Tires
Regular forklift maintenance includes checking tires and replacing worn or damaged tires. Various kinds of forklifts are intended to be used with specific types of tires: pneumatic, polyurethane or solid. Tire kinds differ depending on factors such as ground surfaces, duration and frequency of use and load weight. To change a forklift tire you will require the following tools: tire press, replacement tires and forklift jack. Replacing your forklift tires occasionally is vital to help prolong the life of the machinery.
Instructions
1 Thoroughly check the tires for indications of damage and wear. Make sure that the type of tire on the forklift is the correct kind. If the wear on the tire exceeds 40%, the tire has to be replaced.
2 Purchase spare tires.
3 After you have positioned the jack underneath the tire, slowly lift the forklift high enough that will allow you to easily remove the tires.
4 Take out the old tire by using the tire press to separate the tire from the rim. Replace the tire with the new one and secure firmly. Lower the forklift, then move the jack to the next tire and do the same thing with the other damaged tire.
5 A local repair company can fix a damaged tire on site. If this is your first call, the repair company could provide a free estimate. If the tires are really big, you would require a stationary tire press. In that case, you must remove the tire and bring it to a repair shop.
